| 翻訳と辞書 |
| Cast urethanes ： ウィキペディア英語版 |
Cast urethanes
Cast Urethanes are similar to injection molding. During the process of injection molding, a hard tool is created. The hard tool, made of an A side and a B side, forms a void within and that void is injected with plastics ranging in material property, durability, and consistency. Plastic cups, dishware, and toys are most commonly made using the process of injection molding because they are common consumer items that need to be produced on a mass scale, and injection molding (once the hard tool has been created) is designed for mass production.
Casting urethanes is similar in that polyurethanes are injected into a tool. But with cast urethanes, the tool is a soft tool, typically made with a type of silicone mold. The mold is created via a master pattern. Master patterns for cast urethanes can be created with CNC machining (which is a common process for injection molding) but cast urethane master patterns are often created with additive manufacturing (or 3D Printing) and the reasons for this vary.
Creating a cast urethane master pattern is different from the steps involved in creating hard tooling for injection molding. Hard tools for injection molding are going to be subjected to a lot of stress and heat during the injection process. They will see runs of thousands of parts per day. The care that goes into a hard tool involves intense machine programming which costs thousands of dollars alone. The price for hard tooling is balanced by the mass production the tooling brings, which is where cast urethanes begin to differ. Cast urethanes are suited for smaller runs of parts and prototyping. Because the cost for soft tooling is lower, down in the hundreds rather than thousands, cast urethanes are excellent resources for creators still testing product design, for one-off products, or for testing market and consumer response to a new product.
== Master Patterns ==
Cast urethane master patterns can be produced using machining, additive manufacturing—even an already existing product. The master pattern is used to create an A side and a B side for a mold. The pattern is used to form a void within a mold. The mold material is one that easily picks up surface detail (such as silicones) because the mold will be responsible for reflecting the surface of the product.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Cast urethanes」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|